Back to homepage

EoC terminal NT11

NEW PRODUCT!

Category: EoC terminals

Product description:

The device is an EoC terminal to convert UTP cable to 75 ohm coaxial cable and vice versa.
The device allows to replace the UTP cable with a coaxial cable up to 200 meters of length.
No settings are required, just connect the device according to the picture below. For the external power, use our original power adapter 9-12V DC.
The NT11 terminal works in connection with any Ethernet devices according to 100BASE-TX and 10BASE-T standard.
When two NT11 terminals are connected together using a coaxial cable, the coaxial cable should not be interrupted by any cable connector or other device. If this can not be avoided and it is necessary to use a cable connector, use only quality connectors for coaxial cables with an impedance of 75 ohm.

Get the pricelist

Ordering code:

Brief specification:

Parameter Condition Value
Data RJ45 port 100 Mbit/s
Coax 100 Mbit/s
Power consumption LAN active 50 mA / 12V
Dimensions (w,d,h) 5.4 x 6.0 x 3.2 cm
Temperature range -25 ~ +60 °C

Examples of utilization:

Switch to deskop version
© Copyright EMP-Centauri s.r.o. All rights reserved.
Webmaster: support@emp-centauri.cz